English
Russian
Advantages of Fully Electric Injection Molding Machine
The fully electric injection molding machine is an advanced plastic molding equipment that uses servo motors to directly drive all action units and abandons traditional hydraulic systems. According to authoritative public information, its core advantages can be summarized as follows:
Energy saving and efficient:
The energy consumption is only 20% -30% of the same tonnage hydraulic injection molding machine, and the overall energy saving can reach 25% -70%. Servo motors only consume electrical energy when needed, with no energy consumption during standby and an energy utilization rate of over 95%.
High precision and stability:
Clean and environmentally friendly:
Significant water conservation:
As there is no need to cool hydraulic oil, the amount of cooling water used is reduced by 70% -90% compared to ordinary hydraulic presses.
More information about the Fully Electric Injection Molding Equipment:
Technical advantages:
| Screw diameter | 20mm |
| Theoretical injection volume | 19cm3 |
|
Injection weight(PS)
|
17g |
| Screw L/D ratio | 20 L/D |
| Injection pressure |
2400 kgf/cm2
|
| 245 MPa | |
| Holding pressure | 1920 kgf/cm2 |
| 196 MPa | |
| Injection speed | 300 mm/sec |
| Injection stroke | 60MM |
| Nozzle contact force | 20 KN |
| Screw speed | 0-380 rpm |
| Clamping force | 200 KN |
| Dist.between tie bars(H×V) | 260*260 mm |
| The range of the mold height | 130-260 mm |
| Mold opening stroke | 180 mm |
| Max.daylight | 440 mm |
| Ejector force | 13 KN |
| Ejector stroke | 35 mm |
| Heating power | 3.7 kW |
| Total power | 15 kW |
| Machine dimension | 2.4*0.8*1.2 m |
| Machine weight | 1.28 t |
Application:
Very suitable for the precision drive industry, including syringes, implants, electronic connectors and micro components, automotive sensors and LED optics, ISO 5 cleanliness food grade packaging, etc
Environmental compliance:
Compliant with global sustainable development standards: 65 dB (A) low-noise operation, 0% oil emissions, - RoHS compliant structure
With the development of manufacturing towards more environmentally friendly practices and stricter tolerances, fully electric injection molding machines provide a future oriented solution that combines environmental responsibility with excellent technology. Its advanced motion control capabilities and energy-saving design make it particularly suitable for high-value precision molding operations in regulated industries.
8618576390297
Sales3